The electrical load a modern house carries looks nothing like what the same house was wired to handle a generation ago. EV chargers, home offices, battery backup systems, and high-draw appliances have all landed on panels that were sized for a simpler time. In Gig Harbor, that gap shows up in the calls we take most often: panels that can no longer carry the load, circuits that trip under demands they were never designed to meet, and homeowners who want to add something new and need to know whether the existing infrastructure can support it. We handle all of it, from a single circuit to a full service upgrade.
We work with homeowners, property managers, and small businesses throughout the area. Whether the job is a repair that cannot wait, an upgrade that has been on the list for a while, or an inspection before a sale closes, the process is the same. You call, we scope the job on the phone, confirm the price before anything is scheduled, and explain the work as it goes.
Call (425) 599-4195 to get started.
Properties of a certain age in this part of Pierce County were built with wiring systems that made sense at the time and create real problems now. Knob-and-tube wiring runs as two separate conductors with no ground, relies on air for cooling, and deteriorates in ways that are not always visible from the outside. Insulation breaks down, splices get made in walls without proper boxes, and the system ends up carrying loads it was never rated for. Replacement is the right call when the wiring is in poor condition, when insulation has been laid over it in an attic, or when the home needs circuits the existing system cannot safely support.
Aluminum branch circuit wiring turns up in a different era of construction and carries its own concerns. The connections are the problem, not the wire itself. Aluminum expands and contracts at a different rate than the devices it connects to, and over time that movement loosens connections and creates heat at the termination points. Remediation involves addressing each connection point rather than pulling all the wire, and we give you a plain answer on what the situation actually calls for before any work is scheduled.
Two-prong outlets throughout a home are a reliable sign that the wiring predates the grounding requirements in current code. Grounding and bonding are not cosmetic upgrades. A properly grounded system gives fault current a safe path back to the panel, which is what allows a breaker to trip rather than letting energy find its own route through something it should not. We assess what is in place, explain the options, and install the appropriate protection, whether that means running new grounded circuits or adding GFCI protection as a code-compliant alternative where new wiring is not practical.
When you call, the conversation covers what the job involves and what it will cost before anything is booked. The price depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A repair that traces to a single loose connection is a different scope than one that uncovers a wiring fault running back through several circuits. We ask the right questions on the phone to get a realistic picture before anyone is sent out.
If the job changes once the work is underway, we say so before the additional scope proceeds. Nothing moves forward without your agreement on what it covers and what it costs. Ask what it covers and you get a straight answer. Call now and we will set the appointment.
Commercial and light industrial work in a small city like Gig Harbor often comes down to timing. A retail space, a restaurant, or a professional office has hours to protect, and a job that pulls the main panel offline for half a day is a different conversation than one that can be isolated to a single circuit. We plan commercial jobs around what has to stay live, sequence the work to minimize disruption, and take on out-of-hours scheduling when the business cannot absorb the downtime during operating hours.
The scope of a commercial job also tends to involve more coordination up front. Load calculations matter more when a building is adding equipment across multiple circuits. Lighting upgrades in a commercial space involve fixture counts, switching layouts, and circuit capacity in a way a single-room residential job does not. We work through that planning on the call so the visit is focused and the work moves efficiently once it starts. We are a straightforward choice for property managers and business owners who need the scope confirmed before anyone shows up.
A new appliance, a hot tub, or a workshop load almost always needs a dedicated circuit. Sharing a circuit with other loads leads to nuisance trips at best and a real wiring hazard at worst. We size the circuit to the actual draw of the equipment, confirm the panel has capacity, and run the wiring to the right location. For workshop builds and detached garages, that conversation often includes whether a subpanel makes more sense than running individual circuits back to the main panel.
An inspection makes sense before buying a property, after a storm or flood event, or when something about the electrical system has been nagging at you without a clear cause. Working here means getting the diagnosis right before the work starts. We check the panel, the visible wiring, GFCI and AFCI protection across the circuits that require it, and the grounding and bonding throughout the home. You get a written summary of what we found and what, if anything, needs attention.
A generator that is not connected through a proper transfer switch is a hazard to the utility line and to anyone working on it. The transfer switch is what allows the generator to carry the load safely and isolates the home from the grid while backup power is running. We handle the transfer switch installation and the wiring that connects it to the panel. In a region where grid reliability during storm season is a real concern, this is work that comes up regularly.
A panel replacement is the right call when the existing equipment is undersized for the current load, when breakers are failing or cannot be replaced with correct parts, or when a service upgrade from 100 to 200 amps is needed to support what the home is running. We start with a load calculation, size the new panel correctly, and walk through the scope before any work begins. The job covers removing the old equipment, installing the new panel, reconnecting the circuits, and verifying grounding and bonding throughout.
Scheduling starts on the phone. We scope the job, confirm the price, and agree on a time before anything else moves. For work that will not keep, we take short-notice calls and prompt response, even for last-minute electrical calls, is part of how we operate. We are available every day from 5 AM to 8 PM. If the situation is urgent, say so when you call and we will work out what the schedule allows.
A rental property or an occupied home adds a layer of coordination that we account for from the start. We confirm what circuits need to be de-energized, communicate what to expect before the visit, and sequence the work to restore power as quickly as the job allows. For properties where a tenant has to be present or where access needs to be arranged, we work through that on the call so the visit goes cleanly. You should not have to chase an electrician for answers about how the day is going to go. Pick up the phone. Get a straight answer. That is how we work.
We cover Gig Harbor and the communities around it throughout Pierce County. That includes Rosedale, Canterwood, Maplewood, Raft Island, and Artondale. Both residential and commercial properties across the area are in scope, and the same process applies wherever the job is located: call for a quote, confirm the scope, and schedule when you are ready.
If you are in one of the surrounding communities and are not sure whether you are in our service area, the call will answer that. We do not ask you to figure it out before you pick up the phone. For the full list, go to our electrical repair services page.
Properties close to salt water deal with accelerated corrosion at outlets, fixtures, and panel connections in ways that inland homes do not. Outdoor receptacles, exterior lighting, and any wiring exposed to moisture need materials and installation methods rated for that environment. If you are seeing corrosion at outlets or fixtures, or if a fixture near the water has stopped working, that is worth a call to get properly assessed.
Both involve a dedicated circuit and a panel capacity check before anything is wired. EV chargers draw significantly more current than a standard outlet, and battery storage systems need clean panel integration to function correctly. We assess the panel first, determine whether an upgrade is needed, and then run the circuit and make the connections the system requires. The call is the right place to start, because the answer depends on what is already in the panel.
Yes. The same range of electrical work is available throughout the area, and the process is identical regardless of which community the property is in. You call, we scope the job on the phone, confirm the price, and schedule. There is no difference in how the work is handled based on which part of Pierce County the property sits in.
A partial power loss that follows a clear line through the home often points to a problem at the panel, specifically a breaker or a leg of the incoming service. It can also indicate a fault on a shared circuit. This is worth calling about promptly, because the cause is not always obvious from the outside and the situation can develop.
Whatever brought you to this page, whether it is a panel that cannot carry the load, wiring that needs replacing, a circuit for something new, or a problem you have not been able to pin down, we handle it.
Call (425) 599-4195 and we will scope the job, confirm the price, and get it on the schedule.
We are available every day from 5 AM to 8 PM. Reach out and we will get it diagnosed.
Wiring and panel work covers these nearby towns as well: Artondale, Fircrest, Waller.
We handle the full range of residential and commercial electrical work in Gig Harbor and the surrounding Pierce County area. The table below covers what each service includes, who it fits best, and what is worth knowing before you call. Every job is scoped on the phone before anything is scheduled, and the price is confirmed before we send anyone out.
Call (425) 599-4195 to talk through what your situation involves.
| Service | What It Covers | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Homeowners adding an EV charger, major appliance, or home office to an older home | Panel upgrades in Pierce County often require a permit and inspection. We confirm what applies at your address and walk through the process before scheduling. |
| Lighting Installation |
| Homeowners upgrading interior lighting or adding exterior security coverage | Outdoor fixtures in this region need to be installed with weatherproofing in mind. We account for junction box type, circuit capacity, and switch placement before any wiring starts. |
| Standby Battery for Outages |
| Homeowners who want reliable power for essential circuits during grid outages | Grid reliability concerns have pushed more Gig Harbor homeowners toward battery backup. We handle the electrical hookup and make sure the panel can carry the load the battery system requires. |
Call (425) 599-4195 to talk through what your electrical situation involves. We scope the job on the phone, confirm the price before scheduling, and explain the work as it goes.
(425) 599-4195